How do you cut a zip tie flush? Or How to Cut a Zip Tie Flush Safely.

Cutting a zip tie and making it flush requires precise operation to ensure a smooth, safe cut without sharp edges. Note that the zip ties referred to here are nylon zip ties, not those made of other materials.

Traditional zip tie tools require the user to repeatedly pull the trigger to tighten and then cut the tie, which is time-consuming and labor-intensive. Moreover, the cuts may not be consistent, and the length of the leftover tail may vary. More importantly, it can easily cause hand strain, which is detrimental to health. The operation is as follows:

Tools Needed:

Traditional zip tie tool/Flush cutters (preferred) or diagonal cutting pliers

Safety gloves (optional but recommended)

Steps:

1.Tighten the Zip Tie: Ensure the zip tie is securely fastened to the object.

2.Position the Cutter: Use flush cutters or diagonal pliers to cut as close to the locking mechanism as possible.

3.If using flush cutters, place the flat side of the cutter against the locking mechanism to achieve a clean, flush cut.

4.If using diagonal pliers, carefully adjust the angle to avoid leaving a sharp protrusion.

5.Cut the Zip Tie: Cut the tail of the zip tie in one smooth motion.

6.Inspect the Cut: Check for any sharp edges. If necessary, use a file or sandpaper to smooth the cut.

7.Safety Check: Gently run your finger over the cut area (with caution) to ensure it is smooth and safe.

SWIFT Electric Zip Tie Gun

Steps:

1.Place the zip ties into the vibrating tray of the electric zip tie machine.

2.Aim the electric zip tie gun at the item to be bundled (position it as needed), and pull the trigger. The zip tie will be tightened, cut, and the tail will be recycled, all within 0.7 seconds.

3.Replenish the ties in time to ensure a continuous supply of zip ties to the gun.

In summary, consider using the SWIFT Electric Zip Tie Gun. It only requires the operator to pull the trigger, and the gun will automatically tighten the zip tie and cut off the excess tail. The cutting blade of our zip tie gun is specially designed to ensure the cut has no sharp edges and maintains a highly consistent tail length. More importantly, it improves bundling efficiency and saves labor.

Here are videos FYI, pls check them and they would help you know much our electric automatic cable tie guns.

https://youtu.be/nGkMqr_vW0M?list=PLbMKuJPqJp0BbthOKAE9mm52Xbt8XfCIW

https://youtu.be/UA5Q3JtUel0?list=PLbMKuJPqJp0BFrMQB5VDLT6tsYK7Gs37a

https://youtu.be/vL91_jLD66c?list=PLbMKuJPqJp0BFrMQB5VDLT6tsYK7Gs37a